§ 3-3419 – Consultation and training program; inspection training program
3-3419. Consultation and training program; inspection training program The associate director may develop and implement the following training programs: 1. A consultation and training program for entities regulated under this chapter that uses on-site visits, training and educational materials, and informational presentations to provide training and advice on interpreting, applying and complying, including alternative methods […]
§ 3-3415 – Enforcement powers of the associate director, agents and inspectors
3-3415. Enforcement powers of the associate director, agents and inspectors A. When necessary for the enforcement of this chapter and rules adopted pursuant to this chapter, the associate director or the associate director’s agents and inspectors shall: 1. Enter any commercial, nonprofit business or governmental premises during normal operating hours, except that if the premises […]
§ 3-3416 – State metrology laboratory; operation; standards; testing
3-3416. State metrology laboratory; operation; standards; testing A. The associate director shall establish and operate within the division the state metrology laboratory. B. A commercial device shall not be approved for use in the state unless the design and construction comply with national institute of standards and technology requirements. C. All commercial devices approved and […]
§ 3-3417 – Fees to state general fund
3-3417. Fees to state general fund The associate director shall deposit, pursuant to sections 35-146 and 35-147, all fees collected in the state general fund.
§ 3-3418 – Disposition of seized property
3-3418. Disposition of seized property One hundred eighty days after the final disposition of an investigation and any ensuing enforcement action, the division may destroy those weights, measures or devices that are seized pursuant to section 3-3414 or 3-3415 or transfer the items to the department of administration for disposition as state surplus property pursuant […]
§ 3-3411 – Standard weights and measures
3-3411. Standard weights and measures The system of weights and measures in customary use in the United States and the metric system of weights and measures are jointly recognized, and either one or both of such systems shall be used for all commercial purposes in the state. The definitions of basic units of weight and […]
§ 3-3412 – Physical standards
3-3412. Physical standards Weights and measures that are traceable to the United States prototype standards supplied by the federal government, or approved as being satisfactory by the national institute of standards and technology, shall be the state reference standards of weights and measures and shall be maintained in such calibration as prescribed by the national […]
§ 3-3413 – Technical requirements for commercial devices
3-3413. Technical requirements for commercial devices The specifications, tolerances and other technical requirements for commercial devices as adopted by the national conference on weights and measures and published in national institute of standards and technology handbook 44, " specifications, tolerances, and other technical requirements for commercial weighing and measuring devices" shall apply to commercial weighing […]
§ 3-3414 – Powers and duties; definition
3-3414. Powers and duties; definition A. The division shall: 1. Maintain custody of the state reference standards of weights and measures that are traceable to the United States prototype standards and that are supplied to the states by the federal government or that are otherwise approved as being satisfactory by the national institute of standards […]