Section 19515.

19515. The quality specifications provided in this chapter are the minimum quality specifications which cullet is required to meet for purposes of the exemption specified in Section 19522. (Added by Stats. 1991, Ch. 706, Sec. 1.)

Section 19515.5.

19515.5. Chemical Composition Tolerance (+ or – Oxides Percentage Weight Percentage Range) Silicon Dioxide 66-75 1.00 Aluminum Oxide  0-7  0.50 Calcium Oxide  5-15 0.50 Magnesium Oxide  0-5  0.50 Sodium Oxide  8-18 0.50 Potassium Oxide  0-4  0.50 Iron Oxide  less than 0.5 0.05 Chromium Oxide  less than 0.1 0.02 Sulfur Trioxide  less than 0.2 0.02 All […]

Section 19516.

19516. Contaminants Other Inorganic Material Percentage Weight + 12 Mesh None + 20 Mesh less than 0.1 − 20 Mesh less than 0.2 Magnetic Materials less than 0.1 Nonmagnetic Metals None (Added by Stats. 1991, Ch. 706, Sec. 1.)

Section 19517.

19517. Physical Composition Particle Size: Cullet shall be one of two types below depending upon the requirements of the fiberglass manufacturer. Screen Size Coarse Cullet Fine Cullet + ¼″  0%  0% + 12 Mesh 25% Minimum  0.5% Maximum – 200 Mesh 15% Maximum 15.0% Maximum Color Distribution Tolerance (+ or – Type Nominal Percentage Weight Percentage Range) Flint 0–100 + […]

Section 19518.

19518. The department may change minimum quality specifications based upon the fiberglass industries’ ability to use cullet with higher levels of contamination. (Added by Stats. 1991, Ch. 706, Sec. 1.)

Section 19519.

19519. A fiberglass manufacturer shall comply with all applicable state and federal laws, regulations, and permits concerning the environment, health, or safety when using cullet in fiberglass manufacturing. (Added by Stats. 1991, Ch. 706, Sec. 1.)