Section 215.11 – Dial visible to public.
215.11 Dial visible to public. The weight indicating dial or beams on counter scales used to weigh articles sold at retail shall be so located that the reading dial indicating the weight shall at all times be visible to the public. [C50, 54, 58, 62, 66, 71, 73, 75, 77, 79, 81, §215.11]
Section 215.12 – Bond of scale repairers.
215.12 Bond of scale repairers. Any person, firm, or corporation engaging in any scale repair work for hire in this state shall first file with the department a bond of the form required by chapter 64 in the sum of one thousand dollars conditioned to guarantee the quality and faithful performance of the assumed task […]
Section 214A.18 – MTBE prohibition.
214A.18 MTBE prohibition. 1. A person shall not do any of the following: a. Sell motor fuel containing more than trace amounts of MTBE in this state. b. Store motor fuel containing more than trace amounts of MTBE in a motor fuel storage tank located in this state. 2. As used in this section, “trace […]
Section 215.13 – Graduations on beam.
215.13 Graduations on beam. All new weigh beams or dials on what is known as livestock scales used for determining the weight in buying or selling livestock shall be in not over five-pound graduations. [C50, 54, 58, 62, 66, 71, 73, 75, 77, 79, 81, §215.13]
Section 214A.19 – Demonstration grants authorized.
214A.19 Demonstration grants authorized. 1. The department, conditioned upon the availability of moneys, may award demonstration grants to persons who purchase vehicles which operate on alternative fuels, including but not limited to E-85 gasoline, biodiesel, compressed natural gas, electricity, solar energy, or hydrogen. A grant shall be for the purpose of conducting research connected with […]
Section 215.14 – Approval by department.
215.14 Approval by department. A commercial weighing and measuring device shall not be installed in this state unless approved by the department. 1. A pit type scale or any other scale installed in a pit, regardless of capacity, that is installed on or after July 1, 1990, shall have a clearance of not less than […]
Section 214A.20 – Limitation on liability.
214A.20 Limitation on liability. 1. A retail dealer or other marketer, pipeline company, refiner, terminal operator, or terminal owner is not liable for damages caused by the use of incompatible motor fuel dispensed at the retail dealer’s retail motor fuel site, if all of the following apply: a. The incompatible motor fuel complies with the […]
Section 215.15 – Scale pit.
215.15 Scale pit. Scale pit shall have proper room for inspector or service person to repair or inspect scale. Scale pit shall remain dry at all times and adequate drainage shall be provided for the purpose of inspecting and cleaning. [C50, 54, 58, 62, 66, 71, 73, 75, 77, 79, 81, §215.15]
Section 215.1 – Definitions.
215.1 Definitions. As used in this chapter: 1. “Commercial weighing and measuring device” means a weight or measure or weighing or measuring device used to establish size, quantity, area or other quantitative measurement of a commodity sold by weight or measurement, or where the price to be paid for producing the commodity is based upon […]
Section 215.16 – Weighing beyond capacity.
215.16 Weighing beyond capacity. It shall be unlawful for any person, firm, or corporation to use such a scale for weighing commodities the gross weight of which is greater than the factory rated scale capacity. The capacity of the scale shall be stamped by the manufacturer on each weigh beam or dial. The capacity of […]