43-22-1. Designation of South Dakota state plane coordinate system. The most recent system of plane coordinates established by the National Geodetic Survey for defining and stating the geographic positions or locations of points on, within, or above the surface of the earth within the State of South Dakota are hereafter to be known and designated […]
43-22-10. Use of terms on maps, reports of survey, or other documents–Limitation. The use of the term, South Dakota state plane coordinate system, on any map, report of survey, or other documents, is limited to coordinates based on the South Dakota state plane coordinate system as defined in this chapter. Source: SL 1947, ch 231, […]
43-22-11. Description of land located in more than one zone. If any tract of land to be defined by a single description extends from one coordinate zone into another coordinate zone, the positions of all points on its boundaries may be referred to by the zone that is used being specifically named in the description. […]
43-22-12.1. Description of location on system of plane coordinates. For purposes of describing the location of any survey station or land boundary corner in the state, it is a complete, legal, and satisfactory description of the location to give the position of the survey station or land boundary corner on the system of plane coordinates […]
43-22-13. Purchaser, mortgagee, or insurer not required to rely on description which depends exclusively upon coordinate system. Nothing contained in this chapter requires a purchaser, mortgagee, or insurer of real property to rely wholly on a land description, any part of which depends exclusively upon the South Dakota state plane coordinate system. Source: SL 1947, […]
43-22-15. Application of geodetic reference networks. The provisions of this chapter may not be construed to prohibit the appropriate use of other geodetic reference networks. Source: SL 2022, ch 163, §11.
43-22-2. Division of state into zones for purpose of system. For the purposes of this chapter, the South Dakota state plane coordinate system is divided into zones established by the National Geodetic Survey as a component of the National Spatial Reference System. Each zone shall be uniquely and consistently defined within the South Dakota state […]
43-22-5. Zone designations. The South Dakota state plane coordinate system shall be named in any land description in which it is used, and the zone used shall be specified. Source: SL 1947, ch 231, §2; SDC Supp 1960, §18.0302; SL 1988, ch 349, §3; SL 2022, ch 163, §3.
43-22-6. Definition of system. The official geodetic datums that geodetic coordinates, including latitude, longitude, ellipsoid height, orthometric height, or dynamic height, are referenced within this state, shall be defined for the National Spatial Reference System or its successor. Source: SL 1947, ch 231, §5; SDC Supp 1960, §18.0305 (1); SL 1988, ch 349, §4; SL […]
43-22-8. Plane coordinate values–X and Easting–Y and Northing–Definitions. The plane coordinate values of a point on the earth’s surface, to be used to express the geographic position or location of such point in the appropriate zone of the South Dakota state plane coordinate system, consist of two distances, expressed in feet and decimals of a […]
43-22-9. Recordation of land description based on coordinate system–Limitation. No coordinates based on the South Dakota state plane coordinate system purporting to define the position of a point on a land boundary may be presented to be recorded in any plat, easement, exhibit, deed, certified corner records, or other document unless the coordinate or coordinates […]
